|
|
Off Pump Coronary Artery Bypass (OPCAB)
|
 |
 |
Marco A. Zenati, M.D.
Assistant Professor of Surgery
Division of Cardiothoracic Surgery
Director, Minimally Invasive Cardiac Surgery Program
University of Pittsburgh Medical Center Health System
Pittsburgh , Pennsylvania
|
|
|
 |
|
Beginner
Beating Heart Surgeon (< 50 beating heart cases)
The beginner should consider avoiding patients with unfavorable
characteristics, such as: |
- Cardiomegaly (cardiothoracic ratio > 0.7) as this makes exposure
of lateral and inferior walls of LV difficult.
- Small (<1.5 mm diameter), intramyocardial or diffusely diseased
target vessels.
- Hemodynamically unstable patients.
- Patients with critical left main disease.
- Patients suffering or having recently suffered an acute myocardial
infarction
- Patients with severe left ventricular dysfunction (LVEF < 35%)
Expert
Beating Heart Surgeon (> 50 beating heart cases)
With experience OPCAB can be performed safely in the
vast majority of cases (>90%). However it is not advisable to perform
OPCAB if MULTIPLE unfavorable characteristics are present (e.g. cardiomegaly
in a patient with LVEF 25% and small targets) |
 |
|
| Click
on any of the figures to view a larger version of the image
| Anesthesia
Procedure
Sequence
of anastomoses
Positioning
the heart
Anastomosis |
 |
Operating
Room Setup and Preparation
Preserve normothermia by keeping the operating room
warm, avoiding radiant heat loss and monitoring core body temperature.
Ensure that the heart-lung machine and perfusionist are available.
It is not necessary to prime the heart-lung machine. Review the
chest roentgenogram to assess cardiomegaly before committing to
OPCAB. Confirm availability of stabilizer instrument set of choice,
a CO2 blower and appropriately sized intracoronary shunts. Assure
that the anesthesiologist is comfortable with beating heart surgery
as collaboration crucial for success.
Anesthesia
Unlike traditional CABG where the anesthesiologist
plays a passive role during the performance of bypass grafting,
involvement of the anesthesia team is essential for successful
OPCAB. A continuous cardiac output swan ganz catheter and continuous
mixed venous saturation monitor are helpful. Maintenance of systolic
pressure is important for the heart to tolerate hemodynamically
unfavorable positioning. Alpha agents and inotropic agents are
important to maintain cardiac output during manipulations. If
necessary, an intraaortic balloon can be inserted for temporary
support. |
|
|
Procedure
A traditional sternotomy is performed. All conduits are
harvested as for traditional CABG. The left internal mammary should
be made as long as possible. This will help avoid excessive tension
when the heart is elevated after the graft to the LAD is performed.
Hemi-skeletonization of LIMA (the "Suma technique") preferable as
maximal length achieved in shortest time. Total arterial revascularization
is feasible with OPCAB. Use of composite conduits (Y or T graft)
with the left and right IMA and the radial artery is preferred.
The heparin dose (1-1.5 mg/Kg) is 1/3 of the standard dose for
cardiopulmonary bypass. The target ACT is greater than 300 seconds.
The ACT should be checked every 30 minutes with heparin supplemented
as needed.
Sequence
of anastomoses
The coronary arteries should be grafted in order of increasing
cardiac displacement, i.e. anterior wall vessels followed by inferior
wall vessels and finally lateral wall vessels. The guiding principle
that more cardiac displacement is tolerated with increasingly complete
revascularization. The LIMA to LAD graft is usually first,
the inferior wall grafts (PDA, RCA) are usually next and
the lateral wall grafts (OM) are usually last.
The proximal anastomoses can be performed before or after the distal
anastomoses. The advantage of completing the proximal anastomosis
first is immediate perfusion through the graft after the completion
of the distal anastomosis. The author's preference is to perform
the proximal anastomoses first.
|
Positioning
the heart with mechanical stabilization for target vessel presentation
Proper positioning and stabilization are critical for the success
of OPCAB! The use of a dedicated instrument for target
vessel stabilization strongly encouraged, especially for the beginner
beating heart surgeon (see preference cards)
|
For Anterior
LV wall (Figure 1) presentation (Anterior Descending, Diagonal,
Ramus), a deep pericardial retraction suture, (DPRS, #1 Silk or
Ethibond) is placed 1-2 centimeters above the left superior pulmonary
vein ( Figure 2), pulled taut and secured to the drape on the left
side of the patient. If necessary, especially for the Ramus, an
additional deep pericardial retraction suture (second in figure
2) is placed anterior to the phrenic nerve and caudal to the first
deep pericardial retraction suture. Additional deep pericardial
retraction sutures are positioned until the target vessel is midline
in the sternal incision. Placement of these deep pericardial retraction
sutures must be done deliberately and quickly. The retraction required
to expose the posterior pericardium causes severe hemodynamic compromise.
The blood pressure will recover faster if the patient is head down
with preparatory volume loading.
|
|
For Lateral LV wall presentation (Obtuse Marginals, Posterolateral
branches of right coronary artery) the OR table is placed in steep
Trendelenburg position (Figure 3) and the table is raised and rotated
toward the right (Figure 4). This will allow gravity to displace
heart to the right and apex anteriorly. Suspensory sutures on the
right side of the pericardium are removed. The right pleural space
is opened and the right pericardial incision is extended towards
the inferior vena cava. These maneuvers allow the heart to move
toward the right pleural space. Additional deep pericardial retraction
sutures are placed on the posterior pericardial surface on a line
drawn from the left inferior pulmonary vein to the inferior vena
cava, halfway between the cava and pulmonary vein (third in Figure
2).
|
For Inferior LV Wall presentation (distal Right Coronary
Artery and Posterior Descending Artery), with the table in steep
trendelenberg position, the tension applied to the deep pericardial
retraction sutures is modulated to expose the target vessel in the
center of the operative field (Figure 5, 6). The posterior descending
artery is the preferred site for grafting the right coronary distribution.
The necessary temporary occlusion of the artery, if proximal to
the bifurcation, can cause ischemia of the AV node with resultant
bradycardia. For grafting the right coronary artery the table made
flat and retraction sutures are relaxed with the heart failing to
the left side.
|
Stabilization of target site is accomplished
using one of the many excellent stabilizers available on the market.
These devices work by compression with or attachment (suction or direct)
to the stabilizing arm (Figures 7,8). It is important that these devices
be used as stabilizers, not retractors. The techniques described above
are used to expose the vessel, the stabilizers create an immobile
field. If used as retractors the heart will slip and compression will
cause hemodynamic compromise.
|
Anastomosis
Proximal
occlusion of target vessel is accomplished with an encircling suture
or silastic tape passed widely around the vessel proximal to the site
chosen for anastomosis. No distal occlusion is necessary (Figure 9).
The use of intracoronary shunts is recommended whenever possible, especially
for LAD and RCA. These are very useful when hemodynamically significant
ischemia develops (Figure 10). The anastomosis is performed in a routine
manner according to the surgeon's preference. ![[Illustration: Figure 9]](/graphics/experts/Adult/4165_10.gif) |
| Genzyme OPCAB retractor system. This system uses silastic tapes to surround the vessel, attaching it to a template that immobilizes the vessel. |
![[Illustration]](/graphics/experts/Adult/4165_11t.jpg) |
![[Illustration]](/graphics/experts/Adult/4165_12.gif) |
![[Illustration]](/graphics/experts/Adult/4165_13.gif) | Guidant (formerly CardioThoracic Systems) Ultima II retractor
and stabilizer. This system uses compression to immobilize the vessel. |
| Guidant Flocoil intracoronary shunt (sizes from 1.5 mm to 2.5
mm in 0.25 mm increments). |
![[Illustration]](/graphics/experts/Adult/4165_15.gif) |
![[Illustration]](/graphics/experts/Adult/4165_14t.jpg) | Medtronic Octopus 2 Stabilizer. This system attaches to the existing
reusable retractor. Suction is used to secure the heart to the retractor
and immobilize the vessel. |
|
[TOP
of Page] [Patient Selection] [Operative Steps] [Preference Card]
[Tips and Pitfalls] [References & Online Articles]
[Adult Cardiac Techniques HOME] [CTSNet
HOME]
|
 |
|
- Meticulous attention to detail is critical to success, as
safety margin with OPCAB is reduced compared to traditional
CABG.
|
- Intracoronary shunts are extremely useful in minimizing the
amount of ischemia and improving the safety of the operation.
In cases of a training institution use of shunts allows residents
to be safely trained in OPCAB.
|
- Allow extra time to obtain the best presentation and stabilization
for obtuse marginal vessels. Do not compromise your exposure.
If adequate exposure cannot be obtained the anastomosis should
not be compromised and the traditional approach should be used.
|
- A CO2 blower is crucial for beating heart surgery but has
to be used VERY sparingly at a flow rate not > 5 L /min, to
prevent damage to the coronary endothelium. Avoid directing
the gas jet directly into the vessel lumen to prevent gas embolization.
|
- Heparin reversal is not mandatory. The author's preference
is to administer one-half the calculated protamine dose.
|
- Anastomosis of the obtuse marginal vessels is easier from
the left side of the table.
|
- Place temporary pacing wires before occluding the right coronary
artery proximal to the bifurcation to manage possible A-V block.
|
|
 |
| |
| Calafiore A, Teodori G, Di Giammarco G, et al. Multiple Arterial
Conduits without Cardiopulmonary Bypass: Early Angiographic Results.
Ann
Thorac Surg 1999;67:450-6.
Mohr R, Moshkovitch Y, Shapira I, et al. Coronary artery bypass without
cardiopulmonary bypass for patients with acute myocardial infarction.
J
Thorac cardiovasc Surg 1999;118:50-6.
Wan S, Izzat MB, Lee TW, et al. Avoiding cardiopulmonary bypass in
multivessel CABG reduces cytokine response and myocardial injury. Ann
Thorac Surg 1999;68:52-7.
Pym J. Off pump arterial grafting: 125 cases using the Medtronic-Utrecht
Octopus. Eur J Cardiothorac Surg 1999;16:S88-94.
Jansen EW, Borst C, Lahpor JR, et al. Coronary artery bypass grafting
without cardiopulmonary bypass using the octopus method: results in
the first one hundred patients. J
Thorac Cardiovasc Surg 1998;116:60-67.
Murkin JM, Boyd WD, Ganapathy S. Beating heart surgery: Why expect
less central nervous system morbidity? Ann
Thorac Surg 1999;68:1498-501.
Koh TW, Carr-White GS, DeSouza AC, et al. Effect of coronary occlusion
on left ventricular function with and without collateral supply during
beating heart coronary artery surgery. Heart
1999;81:285-291.
Grundeman PF, Borst C, van Herwaarden JA, et al. Vertical displacement
of the beating heart by the octopus tissue stabilizer: influence on
coronary flow. Ann
Thorac Surg 1998;65:1348-52.
Baumgartner FJ, Gheissari A, Capouya ER, et al. Technical aspects of
total revascularization in off pump coronary bypass via sternotomy approach.
Ann
Thorac Surg 1999;67:1653-8.
Cartier R. Systematic off-pump coronary artery revascularization: Experience
of 275 cases. Ann
Thorac Surg 1999;68:1494-7.
Boyd WD, Desai N, Del Rizzo D, et al. Off-Pump surgery decreases postoperative
complications and resource utilization in the elderly. Ann
Thorac Surg 1999;68:1490-3.
Spooner TH, Hart J, Pym J. A two-year, three institution experience
with the Medtronic Octopus: systematic off-pump surgery.
|
|
|